The LED-lighting system consits of a light control unit and a patented LED-lighting strip with integrated emergency light respectively safety light.

The system operates independently.

The light control unit monitors continuously the main power supply and will switch immediately to the emergency light in case of a breakdown of the main power. It allows a save evacuation of the building.

The system is ideal for buildings where a blackout of the illumination leads to a direct danger for the technician like wind turbines, telecommunication towers, tunnels and elevator shafts.

The system is available depending on the light control unit up to a length of 75 m (SW-2937/DF/075) and 2 x 75 m (SW-2937/DF/150).

The light control unit for applications in an elevator shaft contains additionally a pre-wired connection of a pit bottom control box.

All components comply with the European lift standard EN 81-20 as well as with the CE-, REACH– and RoHS-guidelines.

Illumination of a tunnel with main power
Safety illumination of a tunnel with battery power

The LED-lighting system with integrated safety light meets the requirements of the German standard for work places with safety lighting.

Illumination of a staircase with main power
Safety illumination of a staircase with battery power

Light control unit

  • Device fuse 6 A (SW-2937/DF/075) and 10 A (SW-2937/DF/150)
  • Fuse for the socket of the pit bottom control box 6 A (only version for elevator shafts SW-2937/DE)
  • Latching relay
  • Rechargeable battery with charging set
  • Terminal block with quick installation clamps
  • Pulse switch for the main light (On / Off) with operation display
  • 3 connections for external pulse switches
  • 3 cable runs installed
  • 2 cable runs in the subpackage
  • Plastic housing
  • Safety class IP65
  • Fixation dowels in the subpackage
  • Display of the battery voltage
Item no.: SW-2937/DF/075

Appropriate LED-lighting strips with emergency light

easy connect LED120plus/5ct

(Jacket material, milky, non silicone)

  • 108 high performance-LEDs per meter for the main light
  • 12 high performance-LEDs per meter for the emergency light
  • Milky jacket non silicone to reduce dazzling effect
  • 5 m LED-connection cable with wire terminations
  • Quick installation help
  • Installation dowels with cable ties
Item no.: 953**/5ct (** length rounded up to complete meters)

easy connect LED120plus/hf/5ct

(Jacket material, milky, non halogen and non silicone)

  • 108 high performance-LEDs per meter for the main light
  • 12 high performance-LEDs per meter for the emergency light
  • Milky jacket non halogen and non silicone
  • 5 m LED-connection cable, non halogen with wire terminations
  • Quick installation help
  • Installation dowels with cable ties
Item no.: 993**/5ct (** length rounded up to complete meters)

We’ve summarized all technical details of the lighting strips with emergency lighting in the data sheet ecLED120plus-hf. Details of the extended system for shaft lighting applications are available in the description of system.